Ridge Tiles

Ridge Tile Type: Please Specify Round Triangle Shallow Hip Tall Hip

Change Type

If you change the tile type, please click on the "Change Type" button above to display the appropriate configuration controls for the new type. Do this before changing any other values, or those changes may be lost.

Strip Length: Please Specify 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm 26.0 mm 27.0 mm 28.0 mm 29.0 mm 30.0 mm 31.0 mm 32.0 mm 33.0 mm 34.0 mm 35.0 mm 36.0 mm 37.0 mm 38.0 mm 39.0 mm 40.0 mm 41.0 mm 42.0 mm 43.0 mm 44.0 mm 45.0 mm 46.0 mm 47.0 mm 48.0 mm 49.0 mm 50.0 mm 51.0 mm 52.0 mm 53.0 mm 54.0 mm 55.0 mm 56.0 mm 57.0 mm 58.0 mm 59.0 mm 60.0 mm 61.0 mm 62.0 mm 63.0 mm 64.0 mm 65.0 mm 66.0 mm 67.0 mm 68.0 mm 69.0 mm 70.0 mm 71.0 mm 72.0 mm 73.0 mm 74.0 mm 75.0 mm 76.0 mm 77.0 mm 78.0 mm 79.0 mm 80.0 mm 81.0 mm 82.0 mm 83.0 mm 84.0 mm 85.0 mm 86.0 mm 87.0 mm 88.0 mm 89.0 mm 90.0 mm 91.0 mm 92.0 mm 93.0 mm 94.0 mm 95.0 mm 96.0 mm 97.0 mm 98.0 mm 99.0 mm 100.0 mm

The length of strips is limited to 100 mm by the capabilities of my 3D printer.

Edge Height: Please Specify 0.5 mm 0.6 mm 0.7 mm 0.8 mm 0.9 mm 1.0 mm 1.1 mm 1.2 mm 1.3 mm 1.4 mm 1.5 mm 1.6 mm 1.7 mm 1.8 mm 1.9 mm 2.0 mm 2.1 mm 2.2 mm 2.3 mm 2.4 mm 2.5 mm 2.6 mm 2.7 mm 2.8 mm 2.9 mm

This is the height (or thickness) of the main roof material. For Triangle and Round tiles this needs to fit under the edge overhang, so should include the height of any ribs or sculpting present in the roof material (e.g. pantiles). For the special hip tiles, this should be the basic material thicknes, excluding such sculpting.

Tile Thickness: Please Specify 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.7 mm 0.8 mm 0.9 mm 1.0 mm 1.1 mm 1.2 mm 1.3 mm 1.4 mm 1.5 mm 1.6 mm 1.7 mm 1.8 mm 1.9 mm 2.0 mm 2.1 mm 2.2 mm 2.3 mm 2.4 mm 2.5 mm 2.6 mm 2.7 mm 2.8 mm 2.9 mm

This is the thickness of the tile edges, where visible.

Roof Angle: Please Specify 20 deg. 25 deg. 30 deg. 35 deg. 40 deg. 45 deg. 50 deg. 55 deg. 60 deg.

This is the angle of the main roof surfaces from the horizontal. For hipped and pyramid roofs, all surfaces are assumed to be at the same angle.

Finial Type (*): Please Specify No finial Ball Only Spike Only Ball and Spike Ball in Cup Simple Cross Celtic Cross

The finial(s) will be placed at the end(s) of the strip with a Gable end specification, or at the centre of a junction component.