Stovepipes

Stovepipe Type: Please Specify Long, Straight, Open Top Long, Straight, Socket Top Long, Smooth Bend, Open Top Long, Smooth Bend, Socket Top Long, Segmented Bend, Open Top Long, Segmented Bend, Socket Top Short, Open Top Short, Socket Top Short, Cone Cap Short, Dish Cap Short, Bowl Cap Short, Half-Cylinder Cap Short, Cone Cage Short, Ball Cage Short, Elliptic Cage Short, Hemisphere Cage Short, Sawtooth Crown Short, Tulip Crown Short, Elliptical Crown Short, Circular Crown Short, Vented Cowl Short, Rotary Ball Cowl Short, T-Cylinder Cowl Short, Wind Vane Cowl Short, H-Pattern Cowl

Change Type

If you change the pipe type, please click on the "Change Type" button above to display the appropriate configuration controls for the new type. Do this before changing any other values, or those changes may be lost.

Pipe Diameter: Please Specify 6.0 in 7.5 in 9.0 in 10.5 in 12.0 in 13.5 in 15.0 in 16.5 in 18.0 in

Pipe Length: Please Specify 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm 26.0 mm 27.0 mm 28.0 mm 29.0 mm 30.0 mm 31.0 mm 32.0 mm 33.0 mm 34.0 mm 35.0 mm 36.0 mm 37.0 mm 38.0 mm 39.0 mm 40.0 mm 41.0 mm 42.0 mm 43.0 mm 44.0 mm 45.0 mm 46.0 mm 47.0 mm 48.0 mm 49.0 mm 50.0 mm 51.0 mm 52.0 mm 53.0 mm 54.0 mm 55.0 mm 56.0 mm 57.0 mm 58.0 mm 59.0 mm 60.0 mm 61.0 mm 62.0 mm 63.0 mm 64.0 mm 65.0 mm 66.0 mm 67.0 mm 68.0 mm 69.0 mm 70.0 mm 71.0 mm 72.0 mm 73.0 mm 74.0 mm 75.0 mm 76.0 mm 77.0 mm 78.0 mm 79.0 mm 80.0 mm 81.0 mm 82.0 mm 83.0 mm 84.0 mm 85.0 mm 86.0 mm 87.0 mm 88.0 mm 89.0 mm 90.0 mm 91.0 mm 92.0 mm 93.0 mm 94.0 mm 95.0 mm 96.0 mm 97.0 mm 98.0 mm 99.0 mm 100.0 mm

The length of long pipes is limited to 100 mm (plus any bend), and short pipes to 50 mm (plus any special top) by the capabilities of my 3D printer.

Simulated Joint Type: Please Specify None Socket Flange

No. of Joints: Please Specify 0 1 2 3 4 5 6

The first joint will be placed at the bottom end of the pipe (just above the bend, if present). Any remaining joints will be spread along the length of the pipe at equal intervals (assuming an extra joint is positioned just beyond the top of the pipe).

Scale: Please Specify 16mm 1:22.5 10mm 1:32 7mm 4mm 3.5mm 3mm 2mm